RGB2HDMI for the A500 or A2000 Denise custom chip socket (Raspberry Pi Zero 1/2 required).

• works great for non-RTG standard display modes such as Games, boot screen, etc.
• Software installs on the SD Card for the Pi.
• All high-quality hardware components installed
• on-screen menu that enables adjusting video including auto-calibration, flashing firmware, profiles, and more.
• connect your monitor to the Raspberry Pi's HDMI port.
• works with low-cost Raspberry Pi Zero and Raspberry Pi Zero 2 (with the latest software).
• works with a small and economical SD Card in the Raspberry Pi Zero, like 1GB; the software only takes approx. 30MB (depending on version)
• works well with most any expansion such as a PiStorm and Accelerators. Basically works independently.
• automatically boots/shutoff with the Amiga

Denise socket HDMI board (plugs directly into the Denise socket and Raspberry Pi Zero)

What you will need (not included):

• Raspberry Pi Zero, Raspberry Pi Zero 2 with Header Pins installed
• SD Card to install the software.
• Micro-HDMI cable or adapter to connect to a monitor.

On-Screen Menu Reference Guide: Reference-Guide

Software

Releases

Documents and Manuals

• Instructions